Before a building is constructed, structural calculations are a crucial step to ensure it can withstand various loads, including gravity, wind, and seismic loads.
These calculations also help optimize material use and ensure the building’s safety and structural integrity.
Want to know how this calculation works and how to apply it correctly? Read the full discussion on building structure calculation principles and methods below!
Structural Calculation of Building Principles
Before moving on to the design phase, it is important to understand the fundamental principles of structural calculation to ensure a safe, efficient construction process and a sturdy building. Here are the basic principles of structural calculation that need to be considered:
1. Loads
In structural calculations, loads must be accounted for so the structure can withstand the various forces acting on it. Generally, loads are divided into the following three types:
- Dead Loads: Derived from the weight of permanent building components, such as walls, floors, and roofs.
- Live Loads: These result from activities or objects whose presence may vary, such as people, furniture, and vehicles.
- Environmental Loads: These are external factors that affect a building’s durability, including wind loads, rainfall, snow, and seismic forces.
These three types of loads must be calculated accurately so that the structure can withstand the forces acting upon it.
2. Equilibrium and Stability
A building structure must be in equilibrium to remain stable when subjected to various forces. This is achieved when the total forces and moments acting on the structure balance each other out, resulting in a net value of zero.
This condition is necessary to prevent unwanted movement or deformation. The calculation is conducted based on Newton’s laws and the concept of moments in mechanics.
3. Stress and Strain Analysis
Applying loads to a structure can affect the material’s condition in terms of both stress and shape. Stress indicates the magnitude of the force acting on the material per unit area, while strain describes the change in size or shape caused by that stress.
Through this analysis, engineers can assess a material’s ability to withstand loads and ensure that its deformation does not exceed permissible limits.
4. Material Strength and Reliability
Each material has different capabilities for withstanding forces, whether in tension, compression, or shear. Concrete, for example, can withstand compression well but is less resistant to tension.
Therefore, concrete is often combined with steel in reinforced concrete construction to give the structure greater strength. Understanding these material characteristics helps designers determine the dimensions and shapes of structural elements according to specific requirements.
5. The Principle of Superposition
When a structure is subjected to multiple loads simultaneously, the effect of each load can be analyzed separately. The principle of superposition is used to sum the responses from each load to obtain the structure’s total response. However, this principle applies only to linear systems and helps engineers simplify the complex structural calculation.
Read also: Building Construction: Definition, Types, and Stages
Methods for Structural Calculation of Buildings
Structural calculation helps determine a building’s response to the loads it bears, including the internal forces that arise and its safety margin. To accurately understand structural behavior and load distribution, several methods can be used, as follows:
1. Force Method
The force method is used to determine support reactions and internal forces in statically indeterminate structures. Calculations using this method, also known as the flexibility method or consistent deformation method, involve unknown forces and moments.
This method is suitable for analyzing frame structures, including single-story frames with unusual shapes or geometries.
2. Displacement Method
Unlike the force method, which focuses on forces and moments, the displacement method determines deflections and rotations in a structure. These displacement values are calculated based on equilibrium equations. In practice, the displacement method encompasses the following three approaches:
- Slope-Deflection Method: Used to analyze beams and static frames under both determinate and indeterminate conditions.
- Moment Distribution Method: Uses an iterative approach to obtain calculation results with a specified level of accuracy.
- Direct Stiffness Method: Utilizes matrix analysis to establish the relationship between forces and displacements based on the equations of equilibrium.
Read also: Structural Walls: Definition, Functions, and Types
3. Estimation Methods
Estimation methods are used to estimate forces and moments in structural members as a basis for preliminary design. Calculations are performed using assumptions that approximate the actual structural conditions.
The results can then be further analyzed to refine the design. There are three commonly used approaches, namely:
- Portal Method: Used to analyze building frames subjected to horizontal loads under certain assumptions regarding the location of the inflection point and the distribution of shear forces in columns.
- Cantilever Method: Applied to high-rise buildings by estimating the location of points of inflection in beams and columns, as well as the relationship between axial stress in a column and its distance from the column’s center of gravity.
- Points of Inflection Method: Used to analyze structures subjected to vertical loads. This method assumes that the load is uniformly distributed, that the points of inflection are located at a distance of 0.1L from each support, and that the axial forces in the beams are neglected.
4. The Kani Method
Developed by Gaspar Kani in the 1940s, the Kani method is known as the rotational contribution method. This approach involves distributing the unknown end moments to the surrounding structural joints to satisfy the continuity conditions for inclination and displacement.
Its advantage lies in its self-correcting nature, meaning calculation errors in one iteration can be corrected in the next.
Considering Structural Engineering Services? Here Are Tips for Choosing One
Selecting structural engineering services requires careful consideration to ensure construction safety and cost efficiency. Here are some key points to keep in mind:
- Check the service provider’s experience and portfolio: Choose a provider with experience handling similar projects and a clear track record.
- Pay attention to the qualifications of the experts: Ensure calculations are performed by civil engineers with competency certifications in their respective fields.
- Review the calculation methods: Ensure the service provider uses appropriate structural calculation software and adheres to applicable SNI standards.
- Prioritize document completeness: Verify the availability of calculation reports, structural dimension recommendations, material specifications, and detailed rebar drawings.
- Consider permitting support: Choose a service provider that can help prepare technical documents for a Building Permit (PBG) application.
A thorough understanding of building structural calculations is indeed the main foundation for ensuring a building’s durability and safety. However, structural strength is not only determined by technical calculations. Choosing the right construction materials also plays a crucial role.
To maintain a building's structural integrity over the long term, every part of the building must be protected from water seepage and moisture. Rely on Semen Merah Putih Watershield for this. This super-premium multipurpose cement features water-repellent technology and triple protection that shields buildings from water seepage from the outside, the inside, and even capillary action from the ground.
Semen Merah Putih Watershield makes buildings significantly stronger and more durable, with minimal maintenance costs compared to regular cement. Its premium quality also makes it highly versatile for a wide range of applications, from foundations, concrete slabs, cast-in-place concrete, and masonry to plastering and rendering work.
So, do you want to provide the best protection for your project? Contact us today to explore a variety of solutions and top-quality construction materials ready to support your project's success!
Read also: 10+ Types of House Building Materials & How to Choose Them



