Here's How to Remove Cement Stains on The Tiles, Effective!

Cement splatters that drip and stick to floor tiles are indeed annoying. Usually, cement drips onto the floor that is not covered while applying wall plaster. These cement drips can harden over time and become difficult to remove.

For that reason, here is how to remove cement stains from tiles using simple yet effective household materials. You can apply these materials to the cement that has already hardened and scrub it off. Read on for more details!

Effective Ways to Remove Cement Stains from Tiles

Cement stains on tiles can make floors look dirty and unaesthetic. If it is left untreated, these stains can harden and become increasingly difficult to remove. Fortunately, there are several methods to clean cement stains from tiles. Here are some materials you can use:

1. Baking Soda

Baking soda is not only used as a baking agent but also as a powerful cleaner for stains. To remove cement stains, mix baking soda with a small amount of water to form a paste. Then, apply the paste to the stain and scrub with a brush until the cement lifts off.

Be sure to scrub gently to avoid damaging the tiles. Once the stain is completely removed, rinse the floor with clean water.

2. Vinegar

Another effective way to clean cement stains from tiles is by using vinegar. Simply pour vinegar directly onto the stained area and let it sit for 10–15 minutes. Then, scrub the surface and rinse thoroughly.

The acidity in vinegar helps break down cement stains and making them easier to remove. Vinegar is also safe for skin contact, but wearing latex gloves is recommended.

3. Dish Soap

Dish soap is effective for removing cement stains that haven’t fully hardened. To do it, mix dish soap with warm water and scrub the stain until it lifts off.

4. Lemon or Bilimbi Juice

The next way to get rid of cement stains is by using lemon or bilimbi juice. Lemon juice and bilimbi ) contain high levels of acid, which can help loosen cement stains. Squeeze the juice directly onto the stain and let it sit for a few minutes. Then, scrub the area with a rough cloth until the stain disappears. For better results, mix the juice with warm water before application.

5. HCL Solution (Hydrochloric Acid)

Hydrochloric acid is commonly used to clean stubborn cement stains on rough tiles. Dilute the acid with water in a safe ratio of 1:10 (one part HCL to ten parts water), then apply it to the stain using a cloth or brush.

Once the cement starts to soften, scrub and rinse thoroughly with water to prevent tile damage. Since HCL is highly acidic, wear rubber gloves and protective goggles. Ensure proper ventilation while using it.

6. Hydrogen Peroxide Solution

Hydrogen peroxide is another effective option for removing cement stains. Apply the solution directly to the stain and let it sit for a few minutes. Then, scrub with a sponge or brush and rinse thoroughly.

Since hydrogen peroxide is highly acidic, dilute it with water in a 1:10 ratio to reduce its corrosiveness. Always wear gloves and safety goggles when using it.

7. Salt Solution

Salt is a safe and simple alternative for cleaning cement stains. You can mix salt with a small amount of water to create a thick paste, then apply it to the stain, and gently scrub until the tile is clean.

8. Pumice Stone

Pumice stone has a rough texture that can help scrub off cement stains without damaging the tiles. To apply it, wet both the pumice stone and the tile surface before gently scrubbing the stained area. Be careful not to press too hard to avoid scratching the tiles.

For better results, you can combine pumice stone with other cleaning solutions mentioned above. After the stain lifts off, make sure to rinse it with clean water.

9. Coconut Gratings

The abrasive texture of coconut gratings can also be used to remove stubborn stains. Additionally, the natural oils in coconut help soften dried cement stains. You can simply sprinkle grated coconut over the stain and scrub gently until the cement disappears.

10. Cement Cleaners

If natural methods don’t work, use a commercial cement remover. These products contain chemicals designed to dissolve cement stains quickly and effectively. Remember to always follow the instructions and ensure proper ventilation when using them. After cleaning, rinse the tiles thoroughly with water.

Now that you know how to remove cement stains from tiles, always take precautions when working with acidic solutions like HCL or hydrogen peroxide. You can wear rubber gloves and protective goggles to minimize exposure.

Cement stains often appear during home renovations or construction projects. However, don’t let the fear of dirty tiles stop you from building your dream home. With the right cleaning techniques, removing cement stains is manageable.

For all your construction needs, use Semen Merah Putih Watershield. This product is ideal for concrete slabs, flooring, plastering, and tile installations.

This cement is also enhanced with triple protection and water-repellent technology to safeguard your home from water leaks inside, outside, and underground.

Choose Semen Merah Putih Watershield for tile and bathroom wall installations. Contact us today for more information!