8 Practical and Effective Ways to Remove Mold on Walls!

How to remove mold from walls? This common problem has led many people to seek practical solutions to deal with it.

It is important to note that this type of mold grows on wall surfaces that are dark, damp, and lack air circulation. To prevent it, consider designing your home with good air circulation and other preventive measures.

However, if the problem has already occurred, you can read the following reviews on various methods for removing mold from walls.

What Causes Moldy Walls

Before learning how to remove mold from walls, it is essential to understand the causes first. This is because moldy walls are a common problem due to various reasons.

In this case, the causes of moldy walls are as follows:

High humidity in the room.
Leaky pipes and roofs around the walls.
Cracked walls.
Temperature differences between the inside and outside.
Poor air ventilation.
Dark rooms that rarely get sunlight.
Walls that are not waterproof.

The Impact of Moldy Walls

Did you know why knowing how to remove mold on walls is very much needed? If it is ignored, moldy walls can cause various adverse effects, such as:

Deteriorating the appearance of the house because the walls look dirty.
Damaging the wall structure, such as building materials and wood.
Causing health problems, such as allergies, respiratory disorders, and infections.
Producing an unpleasant musty odor.

How to Remove Mold on Walls to Prevent It from Growing Back

So, how do you remove white mold on walls and other types of mold to prevent it from growing back? There are several effective and practical products available for cleaning mold on walls.

In addition to removing mold on walls, you need to prepare more than just the materials.

For safety, use personal protective equipment, including gloves and a mask. In addition, prepare cleaning tools, such as a brush, spray bottle, rag, or sponge.

The following products can be used to remove mold on walls:

1. Bleach

First, bleach can be used to remove mold from walls and brighten the surrounding area.

Note that bleach is a chemical that is effective for cleaning hard surfaces, such as ceramic tiles. In this case, avoid using bleach on wooden or plasterboard walls.

To use it, mix one cup of bleach with 4 to 10 cups of water. Then, spray, brush, or apply it to the moldy wall using a sponge. Let it sit for about 15 minutes and then rinse with clean water.

As a note, this method of removing mold from walls must be done carefully to avoid negatively impacting your respiratory system and hands. Therefore, be sure to wear gloves and a mask when using this product.

2. Vinegar

Vinegar can also be used to remove mold. This is because vinegar is acidic, allowing it to kill mold at its roots and safely remove odors due to its non-toxic nature.

To do this, you can spray vinegar directly onto the moldy wall, either with or without water, and let it sit for an hour before wiping it off with a clean wiper. If you want to use water, make sure the ratio of vinegar to water is 1:1.

3. Baking Soda

As an alternative method for removing mold from walls, you can use baking soda to clean the walls and eliminate unpleasant odors.

To use this method, dissolve 1 tablespoon of baking soda in a glass of water and spray it on the moldy wall. Then, let it sit for 10-15 minutes before scrubbing it with a brush and rinsing with clean water.

Besides dissolving it, use baking soda to create a thick paste by mixing a small amount of baking soda with water.

In this case, the mixture only needs to be applied to the moldy area and then scrubbed hard before being cleaned with water.

4. Carbolic Solution

Additionally, using a carbolic solution is another effective way to remove mold from walls.

Simply dilute the carbolic solution with water and apply it to the moldy wall. After a few minutes, the area needs to be cleaned with water.

5. Salt Water

Saltwater can also be used effectively to eliminate mold on walls. This is because salt helps absorb moisture from walls, which is often the cause of mold growth.

To remove mold, mix 3 tablespoons of salt with 1 liter of warm water.

Then, spray the solution or wipe with a wiper or towel dipped in salt water. After that, let the area dry naturally.

6. Dish Soap

To remove mold, you can also use dish soap, especially if the condition is not too severe.

For best results, dissolve the soap in warm water and then scrub the moldy area with a sponge or brush. Then, rinse the wall with water and dry it.

7. Tea Tree Oil

Tea tree oil is an essential oil with antibacterial and antifungal properties. Therefore, this oil can be used to remove mold from walls.

To apply it, mix 1 teaspoon of tea tree oil with a glass of water. Once the solution is ready, spray it on the moldy area and let it sit for a few hours.

Then, to clean it, wipe it with a clean, dry fabric so that the solution can continue to work on preventing mold growth.

8. Mold Cleaning Products

Meanwhile, various mold cleaning products are also available to solve this problem. To use them effectively, follow the instructions on the product label for optimal results.

How to Prevent Mold on Walls

After successfully implementing the method to remove mold on the wall, you need to ensure that this does not happen again to prevent adverse effects.

To do this, you can use the following methods to prevent mold on walls:

Repair leaks in the roof or pipes that cause the walls to get wet.
Use a dehumidifier to maintain the humidity in the room.
Ensure good air circulation in the room by opening windows, using an exhaust fan, or employing mechanical ventilation.
Do not dry clothes indoors.
Use paint with anti-mold ingredients.
Use air conditioners or heaters to regulate room humidity and temperature.
Regularly clean walls in areas prone to mold, such as kitchens and bathrooms.
Check mold-prone areas periodically to identify problems early on.

In addition to these methods, you can also use Semen Merah Putih Watershield to help prevent mold caused by leaks in walls or surrounding pipes.

Semen Merah Putih Watershield is a super-premium multipurpose cement that offers several advantages over ordinary cement.

With water-repellent technology, Semen Merah Putih Watershield provides triple protection against water seepage from outside, inside, and soil or capillary water.

These advantages make Semen Merah Putih Watershield ideal for applications on concrete slabs, foundations, castings, plastering, and it has many advantages over regular cement.

If you plan to use it for your construction project, we recommend consulting with our experienced team in advance.

For more information about this product or other products from Semen Merah Putih, contact us directly to find the best construction solution for your project!